Table of Contents
This appendix provides a reference to the elements available in the security namespace and information on the underlying beans they create (a knowledge of the individual classes and how they work together is assumed - you can find more information in the project Javadoc and elsewhere in this document). If you haven't used the namespace before, please read the introductory chapter on namespace configuration, as this is intended as a supplement to the information there. Using a good quality XML editor while editing a configuration based on the schema is recommended as this will provide contextual information on which elements and attributes are available as well as comments explaining their purpose.
The <http> element encapsulates the security configuration for the web layer of your application.
It creates a FilterChainProxy bean named "springSecurityFilterChain" which maintains the stack of
security filters which make up the web security configuration [4]. Some core filters are always created and others will
be added to the stack depending on the attributes child elements which are present. The positions of the standard
filters are fixed (see the filter order table in the namespace introduction),
removing a common source of errors with previous versions of the framework when users had to configure the
filter chain explicitly in theFilterChainProxy bean. You can, of course, still do this
if you need full control of the configuration.
All filters which require a reference to the AuthenticationManager will be automatically
injected with the internal instance created by the namespace configuration (see the
introductory chapter for more on the AuthenticationManager).
The <http> namespace block always creates an HttpSessionContextIntegrationFilter,
an ExceptionTranslationFilter and a FilterSecurityInterceptor. These are fixed
and cannot be replaced with alternatives.
The attributes on the <http> element control some of the properties on the
core filters.
Provides versions of HttpServletRequest security methods such as
isUserInRole() and getPrincipal() which are implemented by
adding a SecurityContextHolderAwareRequestFilter bean to the stack. Defaults to "true".
Controls whether URL patterns are interpreted as ant paths (the default) or regular expressions. In practice
this sets a particular UrlMatcher instance on the FilterChainProxy.
Whether test URLs should be converted to lower case prior to comparing with defined path patterns. If unspecified, defaults to "true"
Indicates whether an existing session should be invalidated when a user authenticates and a new session started. If set to "none" no change will be made. "newSession" will create a new empty session. "migrateSession" will create a new session and copy the session attributes to the new session. Defaults to "migrateSession".
If enabled this will add a SessionFixationProtectionFilter to the stack. The session fixation protection
options on namespace-created instances of AbstractProcessingFilter will also be set appropriately.
Sets the realm name used for basic authentication (if enabled). Corresponds to the realmName proerty on
BasicProcessingFilterEntryPoint.
Normally the AuthenticationEntryPoint used will be set depending on which
authentication mechanisms have been configured. This attribute allows this behaviour to be overridden
by defining a customized AuthenticationEntryPoint bean which will start the authentication
process.
Optional attribute specifying the ID of the AccessDecisionManager implementation which should be
used for authorizing HTTP requests. By default an AffirmativeBased implementation is used for with
a RoleVoter and an AuthenticatedVoter.
Allows the access denied page to be set (the user will be redirected here if an
AccessDeniedException is raised). Corresponds to the
errorPage property set on the AccessDeniedHandlerImpl which is
used by the ExceptionTranslationFilter.
Corresponds to the observeOncePerRequest property of
FilterSecurityInterceptor. Defaults to "true".
Controls the eagerness with which an HTTP session is created. If not set, defaults to "ifRequired". Other options are "always" and "never".
The setting of this attribute affect the allowSessionCreation and forceEagerSessionCreation
properties of HttpSessionContextIntegrationFilter. allowSessionCreation will always be true unless
this attribute is set to "never". forceEagerSessionCreation is "false" unless it is set to "always".
So the default configuration allows session creation but does not force it. The exception is if concurrent session control is enabled,
when forceEagerSessionCreation will be set to true, regardless of what the setting is here. Using "never" would
then cause an exception during the initialization of HttpSessionContextIntegrationFilter.
This element is used to define the set of URL patterns that the application is interested in
and to configure how they should be handled. It is used to construct the
FilterInvocationDefinitionSource used by the FilterSecurityInterceptor and
to exclude particular patterns from the filter chain entirely (by setting the attribute filters="none").
It is also responsible for configuring a ChannelProcessingFilter if particular URLs need to be accessed
by HTTPS, for example.
The pattern which defines the URL path. The content will depend on the path-type attribute from the
containing http element, so will default to ant path syntax.
The HTTP Method which will be used in combination with the pattern to match an incoming request. If omitted, any method will match.
Lists the access attributes which will be stored in the FilterInvocationDefinitionSource for the defined
URL pattern/method combination. This should be a comma-separated list of the attributes (such as role names).
Can be "http" or "https" depending on whether a particular URL pattern should be accessed over HTTP or HTTPS respectively. Alternatively
the value "any" can be used when there is no preference. If this attribute is present on any <intercept-url>
element, then a ChannelProcessingFilter will be added to the filter stack and its additional dependencies added
to the application context. See the chapter on channel security for an
example configuration using traditional beans.
If a <port-mappings> configuration is added, this will be used to by the SecureChannelProcessor
and InsecureChannelProcessor beans to determine the ports used for redirecting to HTTP/HTTPS.
By default, an instance of PortMapperImpl will be added to the configuration for use in redirecting
to secure and insecure URLs. This element can optionally be used to override the default mappings which that class defines. Each
child <port-mapping> element defines a pair of HTTP:HTTPS ports. The default mappings are 80:443
and 8080:8443. An example of overriding these can be found in the namespace introduction.
Used to add an AuthenticationProcessingFilter to the filter stack and an
AuthenticationProcessingFilterEntryPoint to the application context to provide authentication
on demand. This will always take precedence over other namespace-created entry points.
If no attributes are supplied, a login page will be generated automatically at the URL "/spring-security-login"
[5]
The behaviour can be customized using the following attributes.
The URL that should be used to render the login page. Maps to the loginFormUrl
property of the AuthenticationProcessingFilterEntryPoint. Defaults to
"/spring-security-login".
Maps to the filterProcessesUrl property of AuthenticationProcessingFilter.
The default value is "/j_spring_security_check".
Maps to the defaultTargetUrl property of AuthenticationProcessingFilter. If
not set, the default value is "/" (the application root). A user will be taken to this URL after logging in, provided they
were not asked to login while attempting to access a secured resource, when they will be taken to the originally requested URL.
If set to "true", the user will always start at the value given by default-target-url, regardless of how
they arrived at the login page. Maps to the alwaysUseDefaultTargetUrl property of
AuthenticationProcessingFilter. Default value is "false".
Maps to the authenticationFailureUrl property of AuthenticationProcessingFilter.
Defines the URL the browser will be redirected to on login failure. Defaults to "/spring_security_login?login_error", which will
be automatically handled by the automatic login page generator, re-rendering the login page with an error message.
Adds a BasicProcessingFilter and BasicProcessingFilterEntryPoint to the
configuration. The latter will only be used as the configuration entry point if form-based login is not enabled.
Adds the RememberMeProcessingFilter to the stack. This in turn will
be configured with either a TokenBasedRememberMeServices, a PersistentTokenBasedRememberMeServices
or a user-specified bean implementing RememberMeServices depending on the attribute settings.
If this is set, PersistentTokenBasedRememberMeServices will be used and configured with
a JdbcTokenRepositoryImpl instance.
Configures a PersistentTokenBasedRememberMeServices but allows the use of a custom
PersistentTokenRepository bean.
Allows complete control of the RememberMeServices implementation that will be used
by the filter. The value should be the Id of a bean in the application context which implements this interface.
Configures a PersistentTokenBasedRememberMeServices but allows the use of a custom
PersistentTokenRepository bean.
Maps to the "key" property of AbstractRememberMeServices. Should be set to a unique
value to ensure that remember-me cookies are only valid within the one application [6].
Maps to the tokenValiditySeconds property of AbstractRememberMeServices. Specifies the period
in seconds for which the remember-me cookie should be valid. By default it will be valid for 14 days.
The remember-me services implementations require access to a UserDetailsService, so there has to be
one defined in the application context. If there is only one, it will be selected and used automatically by the namespace configuration.
If there are multiple instances, you can specify a bean Id explicitly using this attribute.
Adds support for concurrent session control, allowing limits to be placed on the number of active sessions a user can have.
A ConcurrentSessionFilter will be created, along with a ConcurrentSessionControllerImpl
and an instance of SessionRegistry (a SessionRegistryImpl instance unless the user
wishes to use a custom bean). The controller is registered with the namespace's AuthenticationManager
(ProviderManager). Other namespace-created beans which require a reference to the SessionRegistry
will automatically have it injected.
Note that the forceEagerSessionCreation of HttpSessionContextIntegrationFilter will
be set to true if concurrent session control is in use.
The URL a user will be redirected to if they attempt to use a session which has been "expired" by
the concurrent session controller because the user has exceeded the number of allowed sessions and has logged
in again elsewhere. Should be set unless exception-if-maximum-exceeded is set.
If no value is supplied, an expiry message will just be written directly back to the response.
If set to "true" a ConcurrentLoginException should be raised when a user
attempts to exceed the maximum allowed number of sessions. The default behaviour is to expire the original session.
The user can supply their own SessionRegistry implementation using the
session-registry-ref attribute. The other concurrent session control beans will be wired
up to use it.
It can also be useful to have a reference to the internal session registry for use in your own
beans or an admin interface. You can expose the interal bean using the session-registry-alias
attribute, giving it a name that you can use elsewhere in your configuration.
Adds an AnonymousProcessingFilter to the stack and an AnonymousAuthenticationProvider.
Required if you are using the IS_AUTHENTICATED_ANONYMOUSLY attribute.
Adds support for X.509 authentication. An X509PreAuthenticatedProcessingFilter will be
added to the stack and a PreAuthenticatedProcessingFilterEntryPoint bean will be created. The
latter will only be used if no other authentication mechanisms are in use (it's only functionality is to return an HTTP
403 error code). A PreAuthenticatedAuthenticationProvider will also be created which delegates the
loading of user authorities to a UserDetailsService.
Defines a regular expression which will be used to extract the username from the certificate (for use with the
UserDetailsService).
Similar to <form-login> and has the same attributes. The default value for login-processing-url
is "/j_spring_openid_security_check". An OpenIDAuthenticationProcessingFilter and OpenIDAuthenticationProvider
will be registered. The latter requires a reference to a UserDetailsService. Again, this can be
specified by Id, using the user-service-ref attribute, or will be located automatically in the application context.
Adds a LogoutFilter to the filter stack. This is configured
with a SecurityContextLogoutHandler.
The URL which will cause a logout (i.e. which will be processed by the filter). Defaults to "/j_spring_security_logout".
The destination URL which the user will be taken to after logging out. Defaults to "/".
[4] See the
introductory chapter for how to set up the mapping from
your web.xml
[5] This feature is really just provided for convenience and is not intended for production (where a
view technology will have been chosen and can be used to render a customized login page). The class
DefaultLoginPageGeneratingFilter is responsible for rendering the login
page and will provide login forms for both normal form login and/or OpenID if required.
[6] This doesn't affect
the use of PersistentTokenBasedRememberMeServices, where the tokens are stored on the server side.